Home | Safety Induction | Health & Safety | Training | Video production | Contact us | Privacy | Site Map

Copyright © Artisan training productions 2001 - 2006 - 2009 - 2010

(+44) 01604 452336

Measuring & Marking:

 

A 6 video DVD course

Series content: 6 x video programmes 1 x Instructors manual.
Suitable for: Modern Apprenticeships, NVQ Trainees, Operators, Trainee Technicians, Maintenance Personnel.
 

Part 1: Introduction to General Engineering Disciplines

Training objectives:
  • Describe certain concepts regarding people and practices in typical engineering environments
Running time; 8 min.
 

Part 2: Introduction to General Engineering Disciplines

Training objectives:
  • Describe standard metric linear measurements on the following instruments:
    • Engineer's steel rule
    • Wooden folding rule
    • Standard 2 or 3 meter tape measure
Running time; 18 min.
 

Part 3: Engineering Concepts

Training objectives:
  • Describe the following most basic engineering concepts or standards
    • Flat
    • Straight
    • Level
    • Square
    • Squared off or squarely
    • Round
    • Diameter
    • Radius
Running time; 12 min.
 

Part 4: Using Basic Measuring Instruments

Training objectives:
  • Demonstrate ability to obtain various measurements using conventional non-precision measuring instruments:
    • To within 1mm with tape measures and folding rules
    • To within 0,5mm with an engineer's steel rule
  • On the following surfaces:
    • External surfaces
    • Internal flat surfaces
    • Internal round / cylindrical surfaces
Running time; 16 min.
 

Part 5: Engineering Sketches / Basic Drawings

Training objectives:
  • Interpret basic information from a given, simple engineering type sketch / drawing of a single component in terms of:
    • Shape of object
    • Dimensions of object (including tolerances)
    • Basic hidden detail
    • Material from which object is to be made
    • Scale of drawing
Running time; 14 min.
 

Part 6: Marking Off

Training objectives:
    Mark off detail from drawing to metal workpiece using the following conventional hand held instruments and tools:
    • A scriber
    • A odd-leg (Jenny) calliper
    • Dividers
    • An Engineer's hammer
Running time; 19 min.
 
 

Safety Awareness in the Machine Shop

An instructional DVD designed to give an understanding of the hazards encountered in an engineering machine shop and how to deal with them.

 

Click here for more details

Safe Use of Abrasive Wheels

This interactive computer based training package covers the structure maintenance and mounting of grinding wheels.

 

Click here for further details

PRICE

 

£375 - 00

 

 

Plus VAT (where applicable)

Produced by Tech AV Trust

 

click here to preview this DVD

Some Parts of programmes are available as single units call us for a unit price if you require only individual parts or combinations.

01604 452336 to order by phone

(9am to 5pm)

01604 452 706 to order by Fax